Essential Roller Barrier Brackets

In our latest video we take a close look at the wide range of mounting brackets we offer for our highly effective, totally safe Roller Barrier anti climb system. Read on to learn more.

View this latest Roller Barrier video to learn everything you need to know about Roller Barrier brackets.

Roller Barrier Brackets for Every Installation

Our Roller Barrier anti climb system is widely recognised and acclaimed for its ability to safely prevent people from climbing where they are not welcome. This highly effective anti climb system is now widely used around many domestic properties as well as schools, psychiatric treatment centres, hospitals, prisons, the rail network and many commercial properties. Wherever there is a need to prevent people from climbing, Roller Barrier has totally fulfilled its role.

These widespread installations have required Roller Barrier to be mounted on a wide range of structures including walls, rooftop edges, fascia and even mesh fencing. To meet the challenge of securely mounting Roller Barrier on these varied structures a collection of highly versatile, considerately designed mounting brackets have been developed. These are manufactured from 6mm thick steel bar that’s galvanised for weather protection after being shaped and punched, as required. Brackets can also be produced in the full range of RGB colours or manufactured in stainless steel, if required.

Roller Barrier Bracket Types

There are a wide range of versatile Roller Barrier brackets, available from stock. But we are also happy to discuss custom requirements.

Universal Brackets: Universal Roller Barrier Brackets can be attached to most walls, gates and fences. They can be top fixed or face fixed.
Cranked Brackets: The Cranked Roller Barrier bracket supports the Roller Barrier shaft on a cranked bracket arm, resulting in an overhanging rotating anti climb barrier.
Straight Twist Brackets: The Straight Twist Roller Barrier bracket provides a vertical support for the Roller Barrier central shaft. Typically used on walls or fences and even on mesh fencing, when used in conjunction with bracing plates.
2 & 3 Slot Bracing Plates: Bracing plates are needed when mounting Roller Barrier on mesh fencing. The plate is bolted to the Roller Barrier support brackets with the mesh fencing robustly sandwiched between the two.
Fascia Brackets: Fascia brackets are designed for mounting Roller Barrier along roof lines, often bolted to the wall or fascia.
Alley Brackets: Alley ways are often faced with anti climb challenges. The Alley Bracket for Roller Barrier is designed to be bolted to the wall, either side of an alley way, to support a length of Roller Barrier.
Straight Brackets: Straight Roller Barrier brackets are very simple, straight brackets that are typically used to mount Roller Barrier on structures such as air conditioning or equipment housings.
Lateral Brackets: Lateral Roller Barrier brackets are used to support two rows or parallel Roller Barrier cups.
Vertical 55 Brackets: The Vertical 55 Roller Barrier bracket is specially designed to support two parallel rows of Roller Barrier, slightly offset for greater anti climb protection.
Trigard Bracket: The Trigard Roller Barrier is specially designed to support three parallel rows of Roller Barrier.